Start with batch size
The product page gives a batch size range of 30–300 kg and lists four model numbers. It does not break down capacity by individual model, so confirm the intended model match and batch weight with the supplier.
Built for industrial batch processing, the intelligent garment dyeing machine pairs PLC touchscreen control with SS316L stainless steel, while the broader garment dyeing machine family covers LD-70, LD-130, LD-420, and LD-510 models for 30–300 kg batches.
This product family is presented as an intelligent garment dyeing machine for industrial batch processing. The listed model designations are LD-70, LD-130, LD-420, and LD-510, with original model references XR-70R, XR-130R, XR-400R, and XR-500R. The product page describes a PLC touchscreen control system that supports accurate dosing of water, steam, and chemicals, along with multiple dye formulas and memory storage.
The drum operates variably from 1 to 100 RPM, while maximum temperatures reach up to 99°C. SS316L stainless steel construction is specified for durability and corrosion resistance under high-temperature operation. The page also describes a unique beaters design intended to maintain uniform dye penetration, with the drum and beaters optimized to support fabric movement and help prevent tangling.
The table below reflects details stated on the product page. Where a numeric value is not published, confirm the requirement with the supplier before ordering.
| Item | Listed detail |
|---|---|
| Model numbers | LD-70, LD-130, LD-420, LD-510 |
| Original model designations | XR-70R, XR-130R, XR-400R, XR-500R |
| Construction material | Stainless steel SS316L |
| Drum speed | 1–100 RPM, variable |
| Maximum temperature | Up to 99°C |
| Batch size range | 30–300 kg |
| Control system | PLC touchscreen, multi-formula memory storage |
| Dye types supported | Reactive, pigment, sulfur |
| Applications listed | Knitwear, denim, wool sweaters, seamless underwear, cotton knits, knit hoodies |
| Drum and beater design | Uniquely sized drum and beaters |
| Liquor ratio | Described as ultra-low; no numeric ratio is published |
| Automation | Automated feeding and unloading subsystems |
The product page states that the ultra-low liquor ratio cuts water and steam use by half. It also states that automated unloading and process controls reduce labor by over 60%. Per-model capacity, dimensions, power ratings, and weight are not listed on the product page.
Use the published product facts to narrow the conversation before requesting a quote.
The product page gives a batch size range of 30–300 kg and lists four model numbers. It does not break down capacity by individual model, so confirm the intended model match and batch weight with the supplier.
A PLC touchscreen system with multi-formula memory storage is listed for accurate dosing of water, steam, and chemicals. This is relevant when repeatable recipes and process control are part of the production plan.
Reactive, pigment, and sulfur dyes are listed as supported. Maximum temperatures reach up to 99°C, and SS316L stainless steel is specified for high-temperature operation and corrosion resistance.
Decision summary: confirm the model, batch weight, dye type, and temperature requirement first; then review the control configuration and automation options against the actual production routine.
The product page lists applications including knitwear, denim, wool sweaters, seamless underwear, cotton knits, and knit hoodies. These are the fabric categories to review when deciding whether the LD series fits a particular garment dyeing program.
For knitwear and hoodie production, the PLC touchscreen control and multi-formula memory support repeatable process setup. For denim, the stated maximum temperature of up to 99°C and compatibility with reactive, pigment, and sulfur dyes are relevant points to confirm. For wool sweaters and seamless underwear, the variable drum speed and beaters design are described as ways to support fabric movement, dye penetration, and tangle prevention.
The page also notes that the dyeing liquid can circulate to help fabrics become fully coloured and to reduce the liquor ratio. Automated feeding and unloading subsystems are listed as part of the equipment configuration.
The product page drives quote requests and contact rather than direct purchase. No price, add-to-cart path, or stock indicator is published there. To move forward, share the intended model, batch size, fabric type, dye process, and any required automation details.
Contact the supplier through the official contact page to confirm model suitability and request current commercial details.
Contact usEmail contacts listed on the product page: sales@liyingmachinery.com and info@liyingmachinery.com.
Keep adjacent product options together for a faster catalog comparison.
Engineered for high-volume textile processing, this industrial washing machine delivers precision. Optimize throughput with our expert washing machine system.
View product
Fully customizable OEM solutions for high-volume textile processing. Our washing machine system ensures precision, efficiency, and scalability for manufacturers.
View product
Featuring a 1:2 liquor ratio, this unit supports industrial dyeing machine manufacturer standards for efficiency, precision, and reliable textile production.
View productthe product page lists ld-70, ld-130, ld-420, and ld-510, with original model designations xr-70r, xr-130r, xr-400r, and xr-500r.
it uses plc touchscreen control with multi-formula memory storage, supporting accurate dosing of water, steam, and chemicals.
the page states a batch size range of 30–300 kg and maximum temperatures up to 99°c.
reactive, pigment, and sulfur dyes are listed as supported dye types.
the machine is built in ss316l stainless steel, and the drum operates variably from 1 to 100 rpm.
use the contact us page to send your model interest, batch size, fabric type, and dye process; the product page does not publish pricing or per-model capacity details.
